Repairs to uPVC Windows
uPVC is a great choice for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to rot or rust like aluminum and timber.
It is essential to clean and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs as well as improve energy efficiency.
1. Broken Glass
If the glass in your window has been damaged, it can cause a huge deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to make sure that your windows are in good working order.
Single-pane windows are relatively simple to replace and generally fit into old frames very easily. However when you have double pane windows that are held in place by internal beading it will be more difficult to take out the old panes and put in new ones. In this instance it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.
If you are going attempt to remove the window panes by yourself it is crucial to wear the proper safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a dropcloth before you start working on the glass, so that any shards fall onto the cloth rather than on the floor, where they could be trampled upon and cause further damage.
Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to block drafts and water from entering the property until a professional is able to come out and repair the window. This will also provide an obstruction to prevent criminals from getting into your home. If the distance between the door and the window is large, you might want to use security screens that has an opening. This will give you the best of both.
2. Sagging
Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows made of sash. However, over time, they may be afflicted by a variety of issues, including sliding. A sagging window in uPVC could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from worsening.
Repositioning the hinges could aid in fixing a window that is sliding. To accomplish this, you'll need open the window to access the frame. With the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, shut your window and check for fitting. If you're satisfied with the fit, tighten the screws to ensure they remain in position.
If you can't reposition the hinges you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loosen. If this happens, it's essential to replace the seal as quickly as possible so that your uPVC windows are waterproof and safe from drafts.
UPVC handles can also become loose. Most often, this is caused by screws that have become loose over time. However, it could occur because the handle mechanism has been worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need to close the window and then perform a test to ensure that it fits. The corners of the sash should be aligned with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle, and then return the mechanism to its original its original position.
3. Water Leaks
It is crucial to take action if wake up every morning to find mouldy walls and wet floors. The leaks of water from windows do are not just a cause for degrading of the structure of your home but also hamper your efforts to control the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or is missing.
This is an easy fix that can be completed by any DIYer who is competent. Depending on how severe the issue is, old caulking may have to be removed. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk and then make the area more difficult to clean and can reduce the efficiency of your energy.
It is crucial to make sure that the drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more extreme instances, you may need to replace the window.
Mold spots and rotted sills are other signs of water leakage. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.
If the leakage occurs between the double-glazed window, it is more likely the issue is more with the seal rather than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
Hinges could be at fault when your uPVC window is difficult to open, or if it blows open with the breeze. Anyone who is a skilled DIYer can fix hinges in just a few minutes.
Nearly every home in the UK will have either top hung or side hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. It is essentially a simple procedure, but it is simpler when you have a person to help you hold the frame in place.
Verify that the uPVC hinges are open and closed in the correct direction. You can check this by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.
The problem can be caused by opening the window incorrectly or by a poor installation in the factory. This issue can be fixed by sending us a photo through our website and we will be more than happy to give you advice.
It is also crucial to ensure that the hinges are lubricated on a regular basis. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window operate and close more smoothly. It also helps prevent corrosion and decrease the chance of sticking. Ideally, you should perform this every year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.
5. Draughts
Draughts in upvc windows can be caused by a few various factors. Macclesfield double glazing repairs can also be misaligned due to wear, which can cause an opening between the frame and sash. If they are damaged beyond repair, it may be necessary to have them realigned. In addition, the interlock could be misaligned. This happens on the hinge's side, and might require to be cleaned. In certain instances it might be necessary to replace the hinges.
The second most frequent reason for draughts are the window seals. They are susceptible to being worn out or damaged over time and let air escape through these gaps. Replacing these with high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures, and reduce the possibility of draughts.
The last way to reduce drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler, which can be hung over your window sill. They will help stop cold air from entering and keep your home warm and cosy!
With a little maintenance and repairs your windows made of upvc will continue to provide excellent security and insulation for your home. It is crucial to realize that all windows have a life span and there may come a point where it is more cost-effective to replace them rather than repair them. If you have any problems with your Upvc window it is recommended to speak with a professional as soon as possible.